DC 0~200V 0~300A 9 in1 Power Panel Meter Voltage Capacity Impedance Energy SOC

Description

DC 0~200V 0~300A 9 in1 Power Panel Meter Voltage Capacity Impedance Energy SOC
Overview
The PZEM-013/015 DC multifunction battery tester is mainly used to test all kinds of battery's voltage, discharge current, discharge
power, discharge impedance, internal resistance, capacity, dump energy, energy consumption and running time, and display the
measurement data through LCD screen
PZEM-013: Measuring range 10A (Built-in shunt)
PZEM-015: Measuring range 300A (use external shunt, can matched with 50A, 100A, 200A, 300A four kinds of shunt)
-Voltage-
-Measuring range: 0-200A (when the test voltage is <8V, please use the independent power supply mode)
-Display format:  <10V display as: 9.9V
<100V display as: 99.9V
≥100V display as: 199V
-Minimum resolution: 0.01V
-The starting test voltage: 0.05V
-Measurement accuracy: 1%
-Current-
-Measuring range: 0-10A (Tpye: PZEM-013)
0-300A (Tpye: PZEM-015) can set 50A, 100A, 200A, 300A four range depend on the external shunt
-Display format:  <1A display as: 999mA
<10A display as: 9.99mA
<100A display as: 99.9mA
≥100V display as: 199A
-Minimum resolution: 1 mA
-The starting test current: 10mA (Type: PZEM-013)
20mA (Type: PZEM-015)
-Measurement accuracy: 1%
-Current-
-Measuring range: 0-2000W (Type: PZEM-013)
0-60000W (Type: PZEM-015)
-Display format: <10W display as: 9.99W
<100W display as: 99.9W
<1000W display as: 999W
<10000W display as: 9.99kW
≥10000W display as: 19.9kW
-Minimum resolution: 0.01W
-The starting test power: 0.1W (Type: PZEM-013)
0.2W (Type: PZEM-015)
-Measurement accuracy: 1%
-Impedance- :   impedance=Voltage/Current
-Measuring range: 0-1000Ω
-Display format: <100Ω display as: 99.9Ω
≥100Ω display as: 999Ω
when over the test range or the current is zero, it display "---"
-Minimum resolution: 0.1Ω
-Measurement accuracy: 1%
-Internal Resistance-
Internal resistance=(Full voltage-Bring load voltage) / Bring load current, when the bring load voltage is larger than
the maximum voltage, the internal resistance is zero
-Measuring range: 0-999mΩ
-Display format: 999mΩ , when over the test range or the current is zero, it display "---"
-Minimum resolution: 1mΩ
-Measurement accuracy: 1%
Note: before you test the internal resistance, you should preset the full voltage depend on the battery type, after it is fully charged you
can use it to test; if you do not fully charge it, you can set the battery without load voltage is the full voltage, then test; the internal
resistance is not a fixed value, the more the battery discharged, the bigger the resistance
-Capacity-
-Measuring range: 0-100AH
-Display format: <1AH display as: 999mAH
<10AH display as: 9.99AH
<100AH display as: 99.9AH
<1000AH display as: 999AH
-Minimum resolution: 1mAH
-Measurement accuracy: 1%
Note: battery capacity testing is a cumulative process of discharge current versus time, it need some time, the time is depend on
the dischargecurrent; before you test the capacity, you should preset the full voltage and the cut-off voltage depend on the
battery type, after it is fully charged,you can use it to the discharge test; when the dump energy display blank, it means the discharge
is over, this capacity display vlaue is the battery's capacity
-Dump energy-
-dump energy is display via the battery symbol, totally 10 grids, every grid present 10% energy
-dump energy is calculated via the current battery voltage value, before test you should preset the full voltage and the cut-off
voltage depend on the battery type; every gride voltage= (the highest voltage-the lowest voltage) / 10
-Accumulate energy consumption-
-Measuring range； 0~9999kWh
-Display format: <1kWh display as: 999Wh
<10kWh display as: 9.99kWh
<100kWh display as: 99.99kWh
<1000kWh display as: 999.99Wh
≥1000kWh display as: 9999kWh
over the test range will become zero
-Minimum resolution: 1Wh
-Measurement accuracy: 1%
Note: 1 Wh=0.001 kWh=0.001 Kilowatt
-Running time-
-Measuring range: 0-999 hour (without load the time will not accumulate)
-Display format:   0:00:00~999:59:59
over the test range will become zero
More instructions , please check the manual.........................
Terms and Conditions :
Shipping
Shipping to most other countries takes about 10-30 days via Economy Int'l Airmail without tracking#. In rare case, it can take up to 40 days.
It depends on your location and local postal service(e.g., Russian Postal service is slow),
as well as the weather condition along the shipping.
Please verify your primary shipping address. We are not responsible for any wrong or undeliverable addresses
.
Payment
We accept payment via Paypal.
The buyer is responsible for any applicable import duties and local taxes.
Usually there's no any charges for small parcel. But please verify with your customs before making your purchase.
Contact Us
We take full responsibility if you receive wrong item or damaged item or item not as describled.
If you're not satisfied for any reason, please feel free to contact us. Just send us an message or email.
You can always get our solution pretty soon in our working time.
Your satisfaction is guaranteed.
About UG
Thank you for choose UG.
As a manufacturer of electronic module, UG have been in business more than 20 years, and therefor have wide experience in all the line we handle.
OEM Service Also Welcome!