Disc Brake Actuator Trailer Hitch 2" DICO Aero-6000

Description

You are bidding on a New
DICO AERO-6000
DISC ACTUATOR FOR TRAILER BRAKES
INTRODUCTION TO SURGE BRAKING
Surge brakingis accomplished by replacing a trailer's standard tongue coupler with an actuator and adding hydraulic brake assemblies.  The "surge" or "push" of a trailer toward the tow vehicle during decelration automatically synchronizes these trailer brakes with the tow vehicle brakes.  As the trailer pushes against the vehicle, the actuator telescopes together and applies force to its master clinder, supplying hydraulic pressure to the trailer brakes.
RATED CAPACITY AND USAGE
6,000 POUNDS MAXIMUM GROSS LOAD (weight of trailer fully loaded with all cargo and equipment).  To find yor trailer's Gross Load, use a commercial vehicle scale at a truck weigh station, grain elevator, etc.
600 POUNDS MAXIMUM TONGUE (weight applied downwards by the fully loaded trailer's coupler onto the tow vehicle's hitch).  Measure your tailer's Tongue Load with the tongue in the horizontal towing position, using either a commercial scale or a bathroom scale if the load is small enough.  Upwards tongue loads are not permissible.
The AERO-6000 actuator is intended for use on recreational, marine, and agricultural occasional-us trailes, which are towed by passenger cars or pickups.
Use ONLY with a two inch (2") diameter tow ball.
The actual in-service rating s limited to that of the ball and hitch being used or the trailer manuacture's G.V.W.R. shown on the certification label, whichever is lower.   The AERO-6000 Actuator is ready to bolt into place onto straight three inch wide
trailer
tongues.
Thank you.
GOOD LUCK BIDDING